Where we will construct an Origami Crane today. If you are a beginner, you will need to pay close attention to this origami. Concentrate on the images or written area to ensure that you understand everything.
So, without further saying a word, let's get started.
STEP 1 :-
Take a 15 cm × 15 cm square of Origami paper or just about any square size.
Pick corner A and touch corner B as shown in the figure, then crease it.
( TIP:- For creasing, use your thumbnail )
Then open it and repeat this step for C to D.
reopen it and turn the paper upside down.
STEP 3 :-
There are two folds, one horizontal and one vertical, as shown in the picture.
Make a fold EF and GH first, then flip it.
STEP 4 :-
Simply fold and arrange it as indicated in the image.
STEP 5 :-
crease carefully & press it.
STEP 6 :-
Make three folds in this manner on each side (front and back)
STEP 7 :-
Similarly, Repeat step - 6.
STEP 8 :-
Repeat it.
STEP 9 :-
You see the 6 Folds ( 3 - Front & 3 - Back )
STEP 10 :-
Reopen it.
STEP 11 :-
Pick this corner
STEP 12 :-
Lift up that corner, make a fold horizontally & Press it.
STEP 13 :-
Look at the image and fold where the line is drawn, as shown.
STEP 14 :-
Let's go on to the following phase, Step-15.
STEP 15 :-
Repeat step 13.
STEP 16 :-
Examine the image and fold it on both sides (Right & Left).
STEP 17 :-
Half-turn the side portion, slightly.
STEP 18 :-
Open it.
STEP 19 :-
Also, grab the bottom corner and slowly pull upwards.
STEP 20 :-
That's it 😉
STEP 21 :-
Look at the picture, make a fold & Push inside and make crane's head
STEP 22 :-
We made crane's head.
STEP 23 :-
The final phase will be to create crane wings. Fold the front and back portions downward and open it half way.
- - - Congratulations on your accomplishment - - -
On other social media platforms, you can find us.
👉 Instagram - Craftismarts
👉 Twitter - Craftismarts
👉 Facebook - Craftism_arts
👉 YouTube - Craftism
